From 878bb2f4402687a9636d9991ab68b69e8a9b7e6d Mon Sep 17 00:00:00 2001 From: sven Date: Tue, 9 Mar 2021 11:43:42 +0100 Subject: [PATCH] Added necessary librarys for display to Arduino Sketch --- Arduino/etima/etima.ino | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-) diff --git a/Arduino/etima/etima.ino b/Arduino/etima/etima.ino index 95c2b6e..c15234e 100644 --- a/Arduino/etima/etima.ino +++ b/Arduino/etima/etima.ino @@ -1,9 +1,39 @@ -void setup() { - // put your setup code here, to run once: +#include +#include +#include +#include +#define SCREEN_WIDTH 128 // OLED display width, in pixels +#define SCREEN_HEIGHT 64 // OLED display height, in pixels + +// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins) +// The pins for I2C are defined by the Wire-library. +// On an arduino UNO: A4(SDA), A5(SCL) +// On an arduino MEGA 2560: 20(SDA), 21(SCL) +// On an arduino LEONARDO: 2(SDA), 3(SCL), ... +#define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin) +#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32 +Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET); +void setup() { + Serial.begin(9600); + + // SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally + if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) { + Serial.println(F("SSD1306 allocation failed")); + for(;;); // Don't proceed, loop forever + } + + // Show initial display buffer contents on the screen -- + // the library initializes this with an Adafruit splash screen. + display.display(); + delay(2000); // Pause for 2 seconds + + // Clear the buffer + display.clearDisplay(); + +// testanimate(logo_bmp, LOGO_WIDTH, LOGO_HEIGHT); // Animate bitmaps } void loop() { - // put your main code here, to run repeatedly: }